Flex spacers
The spacers hold the pre-sprouting bags open during filling
Features
The set of spacers consists of:
- 2 beams: 4 m long, 2 mm thick
- 30 connectors
Spacers
video
Watch the video (6 sec.) >>>>>>>
This video shows you how to use the spacers easily.
The spacers hold the pre-sprouting bags open during filling. This prevents any seed potatoes falling in between the pre-sprouting bags. Remove the spacers after filling. The lightweight spacers are just 2 mm thick. They are not heavy.
Spacers
Lay the rods flat
1. Place all pre-sprouting bags with the rods on the Sprinter2 pre-sprouting rack.
2.
With 14 standard bags: 3 bags outside the uprights and 8 bags inside the uprights
For 11 wide bags : 3 bags outside the uprights and 5 bags inside the uprights
3.
Place the rods of two different bags side by side
Attention: the rings of the support rods must be facing
4. Lay the two spacers flat on the pre-sprouting bags
Blocking spacers
turn a quarter turn
Turn the spacers a quarter turn
The rods of two bags are now connected to each other
The pre-sprouting bags can be filled
Need advice or want to place an order?
Curious about what
Cor Joppe
can do for you?
